Milliput Black Epoxy Putty | Building Work | Artwork | Repair Repair Work | For Black Items.

THIS PRODUCT IS BLACK IN COLOUR.
Size : 4oz Pack (113.4gm).
IT IS A TWO PART (BLACK) EPOXY PUTTY.
Quantity : 1 Packet (Containing 2 Parts).

Very Useful for the repair of guttering, ebonised wood, marble, slate, cast iron and black plastic parts.

Brand : Milliput
Special Feature : Waterproof
Colour : Black

Black Milliput is Ideal if you want to match a black surface without painting it afterwards. Once cured the beauty of Milliput is that it can be drilled, filed and sanded while still retaining its adhesive properties and bonding strength.

Typical applications:

Repair of antique clocks
Guttering
Ebonised wood
Marble
Slate
Cast Iron
Basalt ceramics
Black plastic parts
Automotive applications
Jewellery making

Each package contains two separate bars, one of which is a hardener.

Upon mixing an equal quantity of each different bar the material starts to harden, and hardens fully in 90 minutes, after which it can be carved, sanded, drilled, and sculpted over.

If you are interrupted while you are mixing Milliput, you can put the Milliput into a deep freezer until you can get back to work. This will keep the product at approximately the same state of setting at which it was frozen for up to 24 hours

OTHER ADVANTANGES:

- In combination with water will allow to get extra smooth surfaces.
- It allows you easily to merge new layers of milliput over
- It will not get stuck to your either your fingers or your tools
- Once dried, it can be carved, sanded and drilled
- Once dried, it remains very hard and resistance. You may mix it with Plasticine or other clays to save putty reducing it hardness.
- Heat resistance up to 130C.

Irritating to eyes and skin. May cause sensitisation by skin contact. Avoid contact with skin, eyes and clothing. Wear suitable protective clothing. Use with adequate ventilation. KEEP OUT OF REACH OF CHILDREN.

Collection from Ballyconnell Town Centre.